Thank you for your email,

as your guy said it’s bacteria which is caused by stagnant water, but can also be limescale build up which traps the bacteria.

Every time you do a wash limescale can break off & release the bacteria.

Watch this old video I made back in 2010( bit cheesy lol, but valuable content)

plus leave the door open on washer at least 1 inch or so after every wash to allow it to dry inside!

If you have any more issues, please email me back or text me…text is best or a call… I am not always efficient with email, but getting better!

Yours positively

Richard Saupe

07538538138

Ps some people use a bit of bleach on a wash as an alternative to white vinegar!

1. 1-2 litres of white vinegar
2. Turn Washer onto 60-90 degree wash (without prewash/rinse)
3. Pour white vinegar carefully into soap draw after it fills (only open draw about an inch, a funnel could help)
4. Let machine finish, Then leave door open at least an inch(do this everywash)
5. Hopefully the nasty niffs should be gone.

So what causes a washer / washing machine to be smelly

• the pump can not drain all water away, so some gets left behind & goes stagnant
• washers use less water but people still use same amount of soap & conditioner & the appliance gets caked up with residue & goes moody especially with door closed.
• limescale traps bacteria and can break off during wash cycle

Smelly Washer Preventative key points

• Use Soda crystals / Calgon
• Do a hot service washer with towels(once a month)
• leave the door open, so it can dry & gets rid of humidity.
• wipe door & washer seal after every wash, prevent black mould build up!

Please comment, like share on here or on our FB page or our Youtube Channel